Acker Drill Units



ACE

Versatile, Shallow Exploration Drill Unit


  • Lightweight Under 3,000 lbs. [1,361 kg] Transported Easily into Difficult Terrain
  • Coring 961 ft. [293 m] 'N' Wireline
  • 4-Speed Transmission Up to 1,300 RPMs
  • Shallow Exploration (900 ft. ‘N’ Wireline)
  • Up to 30" [76.2 cm] Spindle Travel
  • In / Out Slide Base
  • Drill Head Swivels 360 Degrees
  • In / Out Slide Base
  • 4-Speed Cathead
  • Diesel Engine Std., Other Power Options Available Upon Request
  • Various Mounting Options (Ask Salesman for More Info)
  • More Available Options - Derrick, Ackermatic Chuck, Wireline Winch, Various Pumps, etc.

 

Acker ACE

AD-II

Rugged, Mechanical Rotary Drill Unit


  • Coring 1,900 ft. [580 m] ‘N’ Wireline
  • 10,000 lb. [4,535 kg] Hoist
  • 8 Speed FWD to 970 RPMs/2 Speed REV
  • Spindle Torque 7,000 ft. lbs. [9,490 N-m]
  • 6 ft. [1.83 m] Stroke
  • Automatic Chuck/Automatic Hammer
  • 28,000 lbs. [12,700 kg] Pull
    21,000 lbs. [9,525 kg] Thrust
  • Dual Action Slide Base

 


 

 

 

BUSHMASTER 

All-Hydraulic, Modular Core Drill (Helicopter Fly-In Rig)


  • Coring 900 ft. [275 m] ‘N’ Wireline
  • Helicopter “Fly-In” Rig w/ Max Component Wt. of 1,900 lbs. [862 kg]
  • Power Pack Skid Aluminum Construction
  • 6 ft. [1.83 m] Stroke
  • Spindle Bore 3-5/8” [9.22 cm]
  • 4 Speeds FWD & REV
  • Mast - Removable Extension for 15 ft. [4.58] Pulls
  • Vertical Angle Capability to 45 Degrees
  • Wire Drum Hoist - 6,000 lb. [2,721 kg] Main Hoist

 

 

 


 

MARK III Hillbilly

Rugged, Diamond Core Drill Unit


  • Coring 1,900 ft. [580 m] ‘N’ Wireline
  • 10,000 lb. [4,535 kg] Hoist
  • 4 Speed FWD to 1,200 RPMs/1 Speed REV
  • 30” [76 cm] Stroke
  • Automatic Chuck
  • 19,000 lbs. [8,618 kg] Pull
    15,700 lbs. [7,120 kg] Thrust
  • 360 Degree Angle Capability
  • Slide Base

MP-8

Multi-Purpose, Long Stroke All-Hydraulic Drill Unit


  • Coring 3,460 ft. [1,054 m] ‘N’ Wireline
  • 12,000 lb. [5,440 kg] Hoist Std.
    18,000 lb. [8,160 kg] Optional
  • 8 Speed FWD & REV to 1,000 RPM
  • Spindle Torque 8,000 ft. lb. [10,800 N-m]
  • Up to 13 ft. [3.96 m] Stroke
  • Automatic Chuck/Automatic Hammer
  • 20,000 lb. [9,070 kg] Pull/Thrust
  • 45 Degree Vertical Angle Capability
  • Slide Base/Slide Hammer

R.A.D. (Restricted Access Drill) 

Pushing the Envelope with                  Limited Access


  • Minimum Width 33-1/2” [85 cm] with Use of Retractable Tracks
  • Capable of Fitting Through a Std. 36” [91 cm] Doorway
  • Drill Clearance Under 8 ft. [2.44 m]
  • Coring 860 ft. [270 m] ‘N’ Wireline
  • 4 Speed FWD & REV to 750 RPMs
  • Spindle Torque 3,000 ft. lbs. [4,070 N-m]
  • Mast Extensions Up to 11 ft. [3.35 m] Stroke
  • Automatic Chuck
  • 11,000 lbs. [4,990 kg] Pull/Thrust
  • Diesel, Electric & Propane Engine Options

Watch the YouTube video
featuring the RAD


RENEGADE

Stout, Versatile & Powerful All-Hydraulic Drill Unit


  • Suited to Core, Auger, Probe, SPT
  • Coring 2,307 ft. [703.17 m] ‘N’ Wireline
    Coring Depth Based on 12,000 lb. [5,443 kg] Hoist
  • 8-Speed FWD & REV to 1,000 RPMs w/ Std. Drill Head
  • “P” Drill Head Offers Up to 1,400 RPMs (Optional)
  • Spindle Torque 8,000 ft. lbs. [10,846 N-m] w/ Std. Drill Head
  • 13’ [3.96 m] Stroke
  • 5 ft. [1.52 m] Dump Mast
  • Mast Extension for 20’ [6.09 m] Rod Pulls (Optional)
  • 16,000 lbs. [7,257 kg] Pull / Thrust
  • Dual Action Slide Base
  • Angle Hole Capable Up to a 45 Degree Angle
  • Engine Leveler Allows for Operation on Sloped Hills (Optional)
  • Diesel Engine Std., Other Power Options Available Upon Request
  • Various Mounting Options (Ask Salesman for More Info)
  • More Available Options - Automatic Hammer, Cathead, Ackermatic Chuck, Rod Clamp, Break-Out Wrench, Probe Hammer, Water Tank, Various Winches, Various Pumps, etc.

SOIL-MAX

High-Torque, All-Hydraulic
Drill Unit


  • Coring 2,300 ft. [700 m] ‘N’ Wireline
  • 10,000 lb. [4,530 kg] Hoist Std.
    12,000 lb. [5,440 kg] Optional
  • 8 Speed FWD & REV to 800 RPMs
  • Spindle Torque 11,500 ft. lbs. [15,590 N-m]
  • 6 ft. [1.83 m] Stroke
  • Automatic Chuck/Automatic Hammer
  • 28,000 lbs. [12,700 kg] Pull
    21,000 lbs. [9,525 kg] Thrust
  • 45 Degree Vertical Angle Capability
  • Dual Action Slide Base

SOIL-SCOUT

All-Hydraulic, Compact Drill Unit


  • Coring 860 ft. [270 m] ‘N’ Wireline
  • 4,500 lb. [2,040 kg] Hoist
  • 4 Speed FWD & REV to 750 RPMs – Up to 1,200 RPM Available
  • Spindle Torque 3,028 ft. lbs. [4,105 N-m]
  • 7 ft. [2.13 m] Stroke (Telescoping Feed System)
  • Automatic Chuck
  • 11,000 lbs. [4,990 kg] Pull/Thrust
  • Hydraulic Engine Tilt
  • Radio Remote Control for Tramming
  • Drilling Clearance Less than 8 ft. [2.44 m]
  • Only 47-1/2” [1.21 m] Wide

SOIL-XLS

All-Hydraulic, High-Torque Drill Unit


  • Coring 1,750 ft. [520 m] ‘N’ Wireline
  • 8,500 lb. [3,990 kg] Hoist
  • 8 Speed FWD & REV to 1,000 RPMs
  • Spindle Torque 5,000 ft. lbs. [6,780 N-m]
  • 6 ft. [1.83 m] Stroke
  • Automatic Chuck/Automatic Hammer
  • 11,000 lbs. [4,990 kg] Pull/Thrust
  • Hydraulically Operated Engine Leveler
  • Lateral Slide Head
  • Mast Incorporates 5 ft. [1.52 m] Dump Feature
  • Radio Remote Control for Tramming