Mark III Hillbilly Standard Features

• Power Unit - 44 H.P. air-cooled diesel engine with 12-volt electric start. Air, electric and gasoline powered units optional.
• Drill Head - BX-7 hydraulic drill head, 2-15/16” spindle I.D. 24” travel includes (4) jaw hand chuck. “Optional” 30” travel available.
  
  Drill Head Speeds:
  1st gear (201 RPM) - 2nd gear (416 RPM)
  3rd gear (761 RPM) - 4th gear (1,286 RPM) REV (164 RPM)
  
  
• Transmission - Four (4) speed automotive sliding gear type transmission with one (1) speed in reverse.
• Main Hoist - Planetary type wire drum hoist with 90 ft. of 1/2” hoist cable and safety hook. Capacity 10,000 lbs.
• Mounting - Structural steel drag skid base with 16”

Mark III Hillbilly Optional Features

1. Drill Head - NX4-S hydraulic drill head, 3-5/8” spindle I.D., 24” travel includes (3) jaw hand chuck. “Optional” 30” travel available.
2. Cathead - Cargo type cathead with manual lockout for 1” rope.
3. Ackermatic Hydraulic Chuck Assembly - Autochuck available to suit various head.
4. Water Pumps - Moyno Type and Triplex Type available. Check with factory.
5. Wireline Hoist - Hydraulic motor driven wireline hoist with internal brake. Also available with level wind feature. Includes 3/16” wireline cable.
6. Trailer - Check with factory for details.

Mark III Hillbilly Weights and Dimensions

(Approx. Standard Build, No Options)

• Length/Overall: 100”
• Width/Overall: 40”
• Height: 64”
• Net Weight: 3,220 lbs.
• Gross Weight Crated: 3,890 lbs.
• Cube (ft.): 150 ft.

Note: Weights are approximate and dry measured, + or - 10%