Acker Drill Company Drill Supplies

Acker Drive Heads are threaded with a pin thread on the bottom to take the casing being driven and a box thread on the top to accommodate a guide and pull piece. Reverse drive action is used to pull the pipe. Internal box threads are used to accommodate drive samplers or chopping bits.

All Drive heads are supplied with AW box thread unless otherwise noted.
Other size internal rod box threads available.
Three inch guide pipe available.

Drive Heads
Casing Size	Part Number	Guide Pipe Size		Weight
Casing Size	Part Number	inches	mm.	lbs.	kg.
AW	110201-137	2-1/2	63.5	19.3	8.75
BW	110201-108	2-1/2	63.5	19.5	8.85
NW	110201-109	2-1/2	63.5	21.0	9.5
HW	110201-100	2-1/2	63.5	35.0	15.88