RENEGADE

Brochure

Now working on four Continents, the RENEGADE has built a reputation Worldwide as a versatile, high-performance drill rig with top-notch American workmanship quality. And as the preeminent all-hydraulic multipurpose drill, the RENEGADE separates itself from the pack, just like a true American rebel.

What separates the RENEGADE?

Drill Head offers "Best of Both Worlds" for high-torque needed for augering

and high RPM needed for coring, making it the preeminent multipurpose drill rig.

13 ft. [3.96 m] Drill Head Stroke.

5 ft. [1.52 m] Dump Mast and Engine Leveler allow it to angle drill and drill on slopes

up to a 45 degree incline.

Various options and configurations.

IMG_0749

IMG_0736

IMG_0863

IMG_0728

Power Unit –

Turbo-charged (4) cylinder, 134 HP @ 2,400 rpm with 12-volt electric start. Liquid cooled. Compliant with US EPA Tier 4 Final Emissions standards.

Engine Tilt -

Allows for drilling on hillsides up to 45 degrees. Includes dual hydraulic cylinders.

Feed –

Double acting chain drive mechanism connected to a hydraulic cylinder with 13 ft. [3.96 m] stroke and capable of 20,000 pounds [9,071 kg] upward thrust and 20,000 pounds [9,071 kg] pull down.

Drill Head -

4-5/8" [117 mm] spindle bore, accepts all rod and casing sizes up to "P" wireline or "H" casing. Eight infinitely variable speeds in forward and reverse. Hydraulically operated "slide type" drill head provides clearance for tool handling. Drill Head speeds are from zero to maximum rpm in each gear range.

Lo-Range -

1st Gear (0-54 RPM @ 8,000 ft./lbs. torque)

2nd Gear ( 0-109 RPM @ 3,949 ft./lbs. torque)

3rd Gear (0-194 RPM @ 2,234 ft./lbs. torque)

4th Gear (0-339 RPM @ 1,266 ft./lbs. torque)

Hi-Range -

1st Gear (0-157 RPM @ 2,371 ft./lbs. torque)

2nd Gear (0-319 RPM @ 1,359 ft./lbs. torque)

3rd Gear (0-565 RPM @ 769 ft./lbs. torque)

4th Gear (0-1,000 RPM @ 436 ft./lbs. torque)

Lubrication System -

Provides lubricating oil to drill head and transmission internal parts for extended bearing life.

Mast -

Welded structural steel supports and guides the rotation and feed components. hydraulically positioned then rigidly held in position for drilling (from 45° to 90°), hydraulically lowered to the travel position for moving from hole to hole. Also includes a crown block with sheaves.

Mast Dump -

A 5 ft [6.1 m] hydraulic cylinder allows for convenient mast positioning when drilling angle holes or on uneven terrain.

Drill Frame -

Welded structural steel, supports the mast, control panel, winches and cathead.

Dual Action Slide Base –

Provides both side-to side "wiggle-tail" and in-and-out movement of the drill unit assembly for precise positioning over the hole.

Auger Guide -

Prevents "kick out" when starting new holes. Available in multiple sizes to match preferred auger size. Customer to specify.

Control Panel -

All controls and gauges are grouped together in a convenient panel located at the left rear of the machine and facing the rear.

Undercarriage -

The entire drill is mounted on a structural steel frame, and is self-propelled by rubber crawler tracks with independent reversible hydraulic motor drive. The track drive is operated with a remote radio control system with a back-up control, hi-lo speed selector, and remote throttle control . 100% gradability. 14" [35.56 cm] ground clearance. 4.9 PSI ground bearing pressure with standard equipment.

Hydraulic Leveling Jacks –

Two (2) front and (2) rear mounted jacks with 36" [91 cm] stroke and lock check valves.

Main Drum Hoist -

12,000 lb. [5,440 kg] planetary type with rapid reverse and automatic brake. Equipped with 150 ft. [45.7 m] of 1/2" [12.7 mm] cable.

Auxiliary Hoist -

2,500 lb. [1,334 kg] planetary type. equipped with 75 [22.86 m] ft. of 3/8" [9.6 mm] cable.

Wireline Hoist -

Hydraulically powered. Used for wireline core drilling. 1,000 ft. [304 m] of 3/16" [4.8 mm] wireline cable. Lifting capacity is 800 pounds [362 kg]. Larger capacity wireline hoists available upon request.

Front Winch -

20,000 lb. [9,071 kg] planetary type with automatic brake. Capable of operating in conjunction with tracks. Equipped with 100 ft. [30.48 m] of 5/8" [16 mm] cable.

Cathead Cargo Type Hoist -

Hydraulically powered cargo type hoist.

Water Pump –

Progressive cavity Moyno 3L6 mud pump. Hydraulically driven. Capacity is 27 GPM at 225 PSI.

Water Pump –

Progressive cavity Moyno 3L8 mud pump. Hydraulically driven. Capacity is 50 GPM at 225 PSI.

Water Pump –

Triplex piston pump for high-pressure operations. Flow capacity 22.6 GPM @ 425 PSI.

Water Pump –

Triplex piston pump for high-pressure operations. Flow capacity 35 GPM @ 425 PSI.

Auger Rack -

Front mounted auger rack provides storage for up to 50 feet of 4-1/4" [108 mm] hollow stem augers.

140 lb. [63.5 kg] Automatic SPT Hammer -

Hydraulically driven mechanism conforms to ASTM SPT.

Ackermatic Hydraulic Chuck Assembly -

"P" Chuck handles all rods/casings up to 4-1/2" [114.3 mm] OD. Jaws must be changed for each rod or casing size.

Hydraulic Rod Clamp –

Mast mounted for use in any drilling position or angle. (2) opposing hydraulic cylinders facilitate rod and casing from 1-3/4" [44.4 mm] up to 6-1/2" [139.7 mm] diameter, depending on jaw size. Includes (1) set of jaws.

Break-Out Wrench -

Hydraulically operated cylinder mounted to a wrench provides 1" [25.4 mm] - 6" [152.4 mm] diameter capacity to break drill rod.

RENEGADE

Now working on four Continents, the RENEGADE has built a reputation Worldwide as a versatile, high-performance drill rig with top-notch American workmanship quality. And as the preeminent all-hydraulic multipurpose drill, the RENEGADE separates itself from the pack, just like a true American rebel.

​

What separates the RENEGADE?

Drill Head offers "Best of Both Worlds" for high-torque needed for augering

and high RPM needed for coring, making it the preeminent multipurpose drill rig.

​

13 ft. [3.96 m] Drill Head Stroke.

​

5 ft. [1.52 m] Dump Mast and Engine Leveler allow it to angle drill and drill on slopes

up to a 45 degree incline.

​

Various options and configurations.

Power Unit –

Turbo-charged (4) cylinder, 134 HP @ 2,400 rpm with 12-volt electric start. Liquid cooled. Compliant with US EPA Tier 4 Final Emissions standards.

Engine Tilt -

Allows for drilling on hillsides up to 45 degrees. Includes dual hydraulic cylinders.

Feed –

Double acting chain drive mechanism connected to a hydraulic cylinder with 13 ft. [3.96 m] stroke and capable of 20,000 pounds [9,071 kg] upward thrust and 20,000 pounds [9,071 kg] pull down.

Drill Head -

Lo-Range -

1st Gear (0-54 RPM @ 8,000 ft./lbs. torque)

2nd Gear ( 0-109 RPM @ 3,949 ft./lbs. torque)

3rd Gear (0-194 RPM @ 2,234 ft./lbs. torque)

4th Gear (0-339 RPM @ 1,266 ft./lbs. torque)

Hi-Range -

1st Gear (0-157 RPM @ 2,371 ft./lbs. torque)

2nd Gear (0-319 RPM @ 1,359 ft./lbs. torque)

3rd Gear (0-565 RPM @ 769 ft./lbs. torque)

4th Gear (0-1,000 RPM @ 436 ft./lbs. torque)

Lubrication System -

Provides lubricating oil to drill head and transmission internal parts for extended bearing life.

Mast -

Welded structural steel supports and guides the rotation and feed components. hydraulically positioned then rigidly held in position for drilling (from 45° to 90°), hydraulically lowered to the travel position for moving from hole to hole. Also includes a crown block with sheaves.

Mast Dump -

A 5 ft [6.1 m] hydraulic cylinder allows for convenient mast positioning when drilling angle holes or on uneven terrain.

Drill Frame -

Welded structural steel, supports the mast, control panel, winches and cathead.

Dual Action Slide Base –

Provides both side-to side "wiggle-tail" and in-and-out movement of the drill unit assembly for precise positioning over the hole.

Auger Guide -

Prevents "kick out" when starting new holes. Available in multiple sizes to match preferred auger size. Customer to specify.

Control Panel -

All controls and gauges are grouped together in a convenient panel located at the left rear of the machine and facing the rear.

Undercarriage -

Hydraulic Leveling Jacks –

Two (2) front and (2) rear mounted jacks with 36" [91 cm] stroke and lock check valves.

​

​

Main Drum Hoist -

12,000 lb. [5,440 kg] planetary type with rapid reverse and automatic brake. Equipped with 150 ft. [45.7 m] of 1/2" [12.7 mm] cable.​

​

Auxiliary Hoist -

2,500 lb. [1,334 kg] planetary type. equipped with 75 [22.86 m] ft. of 3/8" [9.6 mm] cable.

​

Wireline Hoist -

Hydraulically powered. Used for wireline core drilling. 1,000 ft. [304 m] of 3/16" [4.8 mm] wireline cable. Lifting capacity is 800 pounds [362 kg]. Larger capacity wireline hoists available upon request.

​

Front Winch -

20,000 lb. [9,071 kg] planetary type with automatic brake. Capable of operating in conjunction with tracks. Equipped with 100 ft. [30.48 m] of 5/8" [16 mm] cable.

​

Cathead Cargo Type Hoist -

Hydraulically powered cargo type hoist.

​

Water Pump –

Progressive cavity Moyno 3L6 mud pump. Hydraulically driven. Capacity is 27 GPM at 225 PSI.

Water Pump –

Progressive cavity Moyno 3L8 mud pump. Hydraulically driven. Capacity is 50 GPM at 225 PSI.

Water Pump –

Triplex piston pump for high-pressure operations. Flow capacity 22.6 GPM @ 425 PSI.

Water Pump –

Triplex piston pump for high-pressure operations. Flow capacity 35 GPM @ 425 PSI.

Auger Rack -

Front mounted auger rack provides storage for up to 50 feet of 4-1/4" [108 mm] hollow stem augers.

140 lb. [63.5 kg] Automatic SPT Hammer -

Hydraulically driven mechanism conforms to ASTM SPT.

​

Ackermatic Hydraulic Chuck Assembly -

"P" Chuck handles all rods/casings up to 4-1/2" [114.3 mm] OD. Jaws must be changed for each rod or casing size.

Hydraulic Rod Clamp –

12,000 lb. [5,440 kg] planetary type with rapid reverse and automatic brake. Equipped with 150 ft. [45.7 m] of 1/2" [12.7 mm] cable.