As the heir to our popular SOIL-XLS drill rig, the Acker REBEL XL continues its legacy with added features and a new mid-sized track system. Like all Acker rigs, it shines with its low-end torque and high-end speed, excellent production, and low cost to own. And with features like the Mast Dump and Engine Tilt, contractors can drill efficiently on sloped terrain where other drills dare not.
What separates the REBEL XL?
Turbo-Charged Tier 4 Final Engine.
Drill Head offers "Best of Both Worlds" for high-torque needed for augering and high RPM
needed for coring, making it the preeminent multipurpose drill rig.
5 ft. [1.52 m] Dump Mast and Engine Leveler allow it to angle drill and drill on slopes up to
a 45 degree incline.
High quality, aggressive Rubber Track System allows for excellent traction and stability.
Various options and configurations.
Main Drum Hoist -
8,500 lb. [3,855 kg] planetary type with rapid reverse and automatic brake. Equipped with 75 ft. [22.8 m] of 1/2" [1.27 cm] cable.
Wireline Hoist -
Hydraulically powered, used for wireline core drilling. 1,000 ft. [304 m] of 3/16" [.48 cm] wireline cable. Lifting capacity is 800 pounds [362 kg].
Front Winch -
12,000 lb. [5443 kg] planetary type with automatic brake. capable of operating in conjunction with tracks. Equipped with 100 ft. [30.48 m] of 5/8"[1.6 cm] cable.
Auxiliary Winch -
2,500 lb. [1,334 kg] planetary type. Equipped with 75 ft. [22.86 m] of 5/16"[.81 cm] cable.
Cathead Cargo Type Hoist -
Hydraulically powered cargo type hoist.
Water Pump –
Progressive cavity Moyno 3L6 mud pump. Hydraulically driven. Capacity is 27 GPM at 225 psi.
Water Pump –
Triplex piston pump for high-pressure operations. Flow capacity 22.6 GPM @ 425 psi.
Auger Rack -
Front mounted auger rack provides storage for up to 50 ft. of 4-1/4" [10.8 cm] hollow stem augers.
140 lb. [63.5 kg] Automatic SPT Hammer -
Hydraulically driven mechanism conforms to ASTM SPT.
Ackermatic Hydraulic Chuck Assembly -
"H" Chuck handles all rods/casings up to 3-1/2" [88.9 mm] OD. Jaws must be changed for each rod or casing size.
Hydraulic Rod Clamp –
Mast mounted for use in any drilling position or angle. (2) opposing hydraulic cylinders facilitate rod and casing from 1-3/4" [4.44 cm]up to 4-1/2" [11.43 cm] diameter. Includes (1) set of jaws.
Break-Out Wrench -
Hydraulically operated cylinder mounted to a wrench provides 1" [2.54 cm] - 6" [15.24 cm] diameter capacity to break drill rod.
Rod Tray and Double Tool Box -
Where space permits in lieu of Water Tank.
Water Tank -
Where space permits in lieu of double tool box.
Mast Extension -
For 15 ft. [4.5 m] rod pulls.
Power Unit –
Tier 4 Final. (4) cylinder turbo-diesel, 74 HP @ 2,800 rpm with 12-volt electric start.
Engine Tilt -
Allows for drilling on hillsides up to 45 degrees.
6 ft. [1.82 m] stroke and capable of 15,000 pounds [6,803 kg] upward thrust and 15,000 pounds [6,803 kg] pull down.
Drill Head -
3-5/8" [9.2 cm] spindle bore, accepts all rod sizes up to "HW" and casing sizes up to "N". Easy to service "bolt on" style drill head. Eight (8) infinitely variable speeds in forward and reverse. Hydraulically operated "slide type" drill head provides clearance for tool handling. Drill head speeds are from zero to maximum RPM in each gear range.
Lo-Range (High Torque) -
1st Gear (0-60 RPM @ 5,364 ft./lbs. torque)
2nd Gear ( 0-126 RPM @ 2,565 ft./lbs. torque)
3rd Gear (0-231 RPM @ 1,392 ft./lbs. torque)
4th Gear (0-398 RPM @ 809 ft./lbs. torque)
Hi-Range (High Speed) -
1st Gear (0-155 RPM @ 2,079 ft./lbs. torque)
2nd Gear ( 0-324 RPM @ 994 ft./lbs. torque)
3rd Gear (0-597 RPM @ 539 ft./lbs. torque)
4th Gear (0-1,027 RPM @ 314 ft./lbs. torque)
Lubrication System -
Provides lubricating oil to drill head and transmission internal parts for extended bearing life.
Welded structural steel supports and guides the rotation and feed components. Hydraulically positioned then rigidly held in position for drilling (from 45° to 90°), hydraulically lowered to the travel position for moving from hole to hole. Includes a crown block with sheaves.
Mast Dump -
A 5 ft. [6.1 m] hydraulic cylinder allows for convenient mast positioning when drilling angle holes or on uneven terrain.
Drill Frame -
Welded structural steel, supports the mast, control panel, winches and cathead.
Dual Action Slide Base –
Provides both side-to-side "wiggle-tail" and in-and-out movement of the drill unit assembly for precise positioning over the hole.
Auger Guide -
Prevents "kick out" when starting new holes. Available in multiple sizes to match preferred auger size.
Control Panel -
All controls and gauges are grouped together in a convenient panel located at the left rear of the machine and facing the rear.
The entire drill is mounted on a welded structural frame and is self-propelled by rubber crawler tracks with independent reversible hydraulic motor drive. The track drive is operated with a remote radio control system.
Hydraulic Leveling Jacks –
Two (2) front and (2) rear mounted jacks with 36" [91 cm] stroke and lock check valves.